Low RPM Hydraulic Motor Mining Plasting Rotary Drilling Rig Drive Motors
Quick details:
This BMT315-4TDBHydraulic BMT is a motor replace with OMT.
| OMT 315 C | Displacement | flange | Shaft | Ports | Drain | |
| BMT 315 C | 315 cc | 4-Ø14 Square-flangeØ160, pilotØ125×9 | Tappered shaft , parallel key B12×8×28 | G3/4 Manifold Mount,4-M10 | G1/4 |
BMT Introduction:
This Low Speed High Torque hydraulic motor BMT is a big motor compare with other series like BMM(OMM,MM), BMP(OMP, MP), BMR(OMR, MR), BMH(OMH, MH), it's displacement start from 160 ml/r to 800 ml/r, speed from 154 rpm to 780 ml/r, torque from 470 N.m to 1665 N.m, max output from 22.2 kw to 40 kw, max flow from 100 L/min to 150 L/min.Below is the detail specifications of this BMT low speed high torque hydraulic motors.
Applications:
Hanjiu produce and supply hydraulic motors to kind of mining drilling equipments.
Orbital Hydraulic Motors, Low Speed High Torque type
totally we have 7 type motors available, for heavy duty drilling work, we recommend our BMS, BMT, BMV series. These motors used on:
- rock drill rig,
- multipurpose drill rig,
- coring investigation drill rig,
- soil investigation drill rig,
- piling grouting drill rig,
- jet grounting drill rig,
- water well drill rig,
BMT is the most common one used on mining & drilling machines.
Specifications:
| Flange |
| 4 | 4-Ø14 Square-flangeØ160,pilotØ125×9 | BMT |
| K6 | 4-Ø14.5Square-flangeØ162,pilotØ127×9 |
| W | 4-Ø18 Wheel-flangeØ200,pilotØ160×7 |
| D | 4-Ø14 Circle-flange Ø160,pilot Ø125×8 | BMTS |
| E | 4-Ø14.5 Square-flange Ø162, pilot Ø127×10 |
| Output Shaft |
| M | Shaft Ø40,parallel key 12×8×70 | BMT |
| G | Shaft Ø38.1,parallel key 9.52×9.52×57.15 |
| F | Shaft Ø38.1,splined tooth 17-DP12/24 |
| FD | Shaft Ø38.1,splined tooth 17-DP12/24 |
| T | Cone-shaft 1:10 Ø45,parallel key B12×8×28 |
| T1 | Cone-shaft 1:8 Ø45,parallel key 11.13×11.13×31.75 |
| SL | shaft Ø34.85,Splined key,Splined key 6-34.85×28.14×8.64 |
| G1 | shaftØ31.75,parallel key 7.96×7.96×40 |
| F1 | Shaft Ø31.75,splined tooth 14-DP12/24 |
| Omit | Short shaft 16-DP12/24 | BMTS |
| Port and Drain Port |
| D | G3/4 Manifold Mount,4-M10 , G1/4 |
| M | M27×2 Manifold Mount,4-M10, M14×1.5 |
| S | 1-1/16-12UN O-ring, 9/16-18UNF |
| S1 | 1-1/16-12UN O-ring, 7/16-20UNF |
| G | G3/4,G1/4 |
| M3 | M27×2,M14×1.5 |
| Main Specifications: |
| Type | BMT 160 | BMT 200 | BMT 230 | BMT 250 | BMT 315 | BMT 400 | BMT 500 | BMT 630 | BMT 800 | Geometric displacement
(cm3 /rev.) | 161.1 | 201.4 | 232.5 | 251.8 | 326.3 | 410.9 | 523.6 | 629.1 | 801.8 | | Max. speed (rpm) | cont. | 625 | 625 | 536 | 500 | 380 | 305 | 240 | 196 | 154 | | int. | 780 | 750 | 643 | 600 | 460 | 365 | 285 | 233 | 185 | | Max. torque (N·m) | cont. | 470 | 590 | 670 | 730 | 950 | 1080 | 1220 | 1318 | 1464 | | int. | 560 | 710 | 821 | 880 | 1140 | 1260 | 1370 | 1498 | 1520 | | peak | 669 | 838 | 958 | 1036 | 1346.3 | 1450.3 | 1643.8 | 1618.8 | 1665 | | Max. output (kW) | cont. | 27.7 | 34.9 | 34.7 | 34.5 | 34.9 | 31.2 | 28.8 | 25.3 | 22.2 | | int. | 32 | 40 | 40 | 40 | 40 | 35 | 35 | 27.5 | 26.8 | Max. pressure drop
(MPa) | cont. | 20 | 20 | 20 | 20 | 20 | 18 | 16 | 14 | 12.5 | | int. | 24 | 24 | 24 | 24 | 24 | 21 | 18 | 16 | 13 | | peak | 28 | 28 | 28 | 28 | 28 | 24 | 21 | 19 | 16 | | Max. flow (L/min) | cont. | 100 | 125 | 125 | 125 | 125 | 125 | 125 | 125 | 125 | | int. | 125 | 150 | 150 | 150 | 150 | 150 | 150 | 150 | 150 | Max. inlet pressure
(MPa) | cont. | 21 | 21 | 21 | 21 | 21 | 21 | 21 | 21 | 21 | | int. | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | | peak | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | | Weight (kg) | 19.5 | 20 | 20.4 | 20.5 | 21 | 22 | 23 | 24 | 25 | * Continuous pressure :Max. value of operating motor continuously.
* Intermittent pressure :Max. value of operating motor in 6 seconds per minute.
* Peak pressure:Max. value of operating motor in 0.6 second per minute. |
Substitute Reference substance
MOTOR CROSS REFERENCE TABLE |
| |
HANJIU
HYDRAULIC | M+S
HYDRAULIC | EATON
CHAR LYNN | | ROSS
TRW | WHITE
CROSS | PARKER | SAM
BREVINI | BOSCH
RECROTH |
| BMM | MM MLHK | J SERIES | OMM | | | | BGM | MGX |
| BMP/BM1 | MP HP | H SERIES | OMP DH | MF MG | WP RS | TC TE TB | BG | MGP GXP |
| BMR/BM2 | MR HR MLHRW,RW | S,T SERIES W SERIES | OMR DS OMEW | MB | WR RE | TF | BR | MGR GMR |
| BMH/BM4 | MH MLHH HW HWF | | OMH | ME | RE | TG | | |
| BMS/BM5 | MS MSY MLHS | 2000 SERIES | OMS | ME | RE | TG | HPR | MGS GMS |
| BMT/BM6 | MT MLHT MTM | 6000 SERIES | OMT TMT | MJ | | | HT | MGT,GMT |
| BMV | MV MLHV | 10000 SERIES | OMV | | | | | MGV GMV |
Please do not hesitate to contact us for further information, inquiries or orders.
Thank you for choosing 'Hanjiu' Hydraulics.
Product Tags:
|
|
Low RPM Hydraulic Motor Mining Plasting Rotary Drilling Rig Drive Motors Images
|
